Answer
Instructions for refilling the Xstamper® VersaDater® may be found here. In order to re-ink your stamp, just remove it from the stand and lay it down on its side. There will be an inkwell hole visible. Drops of ink should be placed into the ink well hole.
In the same vein, many have inquired as to how to disassemble an Xstamper.
Remove the white cap from the top of the mount and insert 2-4 droplets of the same colour ink into the middle of the mount’s aperture. In order to use the XpeDater, place a few drops of the matching colour ink in the base of the pen and a few more in the travel cap as required. Holding the teal handle and the white Impression FrameTM firmly together, pull them apart.
Also, how does one go about putting ink inside a stamp?
Remove the stamp holder from its position. Using the ink bottle, apply five drops of ink to each of the stamp’s refill holes, starting at the top of the stamp. When applying ink, proceed with utmost caution. Reattach the stamp holder to the stamp. Keep the stamp pointing down for the first few seconds after replenishing the ink until the ink starts to flow from the stamp.
When taking all of this into consideration, how do you replace scanned stamps?
Put on your latex gloves and carefully pry the plastic cover off of your stamping machine. Open the AccuStamp refill and squeeze three to four droplets onto the stamp plate, distributing them evenly. Replacing the lid will give you 15 to 20 seconds to allow for the ink to soak completely. Test the stamp on a piece of paper to ensure if it is functional.
What is an Xstamper, and how does it work?
The Xstamper® brand is comprised of pre-inked rubber stamps that do not need the use of a stamp pad to be used. Because of the built-in ink reservoir mechanism, you will be able to stamp clearly and continuously for many years to come. A wide range of Xstamper® products are offered, including the recently created line of ergonomic devices, among other things.
There were 13 related questions and answers found.
What is the best way to fill a ClassiX Xstamper p12?
The only time you should use ClassiX Refill Ink is to re-ink your stamp pad. Instructions for re-inking: Push the locking buttons on each side of the stamp, which are located on either side of the top of the stamp, down slightly. The ink pad will be able to slip out as a result of this. Carefully remove the ink pad from the printer. 3-4 droplets of ink should be placed onto the stamp pad.
What is the best way to apply ink to a stamp in Excel?
More videos may be seen on YouTube. In order to lock the stamp into place, press the buttons on the side of the stamp. Take the ink pad out of the bag. 10 to 20 drops of Trodat / Ideal Ink should be placed on the pad’s inked side. DIRECTIONS: Once the ink has been absorbed by the pad, push the pad back into the pad slot.
What is the process for unlocking a stamp?
1- Lightly press the top of the stamp to line the pad with the opening at the back of the stamp. 2- Press the bottom of the stamp to align the pad with the aperture at the rear of the stamp. 2- Using the lock/unlock button, secure the stamp in place. 3- After removing the lid, remove the old pad and replace it with the new pad. 4- Press the lock/unlock button to unlock the stamp.
ncG1vNJzZmivp6x7r6%2FEq6upp5mjwW%2BvzqZma2hiZ3xxfY6hprBllKR6qnnRnp2ipJxiurp516yrmqWgmr9uscKoZKCqlZq7br%2FTmqSpZpipuq0%3D